How To Make A Digital Photo Frame With A Raspberry Pi

The idea of a digital photo frame really appealed to me as I tend to take lots of photos but am reluctant to print them all.

Having one would let me display all the photos I want in a nice display without the complication of sending them away to be printed, collecting the photos, putting the photos into frames, photo albums etc.

I did price digital photo frames online but liked the idea of building my own, and what better way to go than with a Raspberry PI!

In this guide I share with you the steps I followed to create a digital photo frame using a Raspberry PI.

Why not PIN THIS to read later?

What I Used

Here is all of the equipment I used for this project:

  • A Raspberry Pi – I used the Raspberry Pi 3 for this project.
  • Heatsinks – Optional – I haven’t overclocked the Pi so didn’t need them in this case but could be used (If I had any lying around).
  • Pi case – To attach the Pi to the back of the frame.
  • Pi Power adapter – it is important to use the correct power adapter to ensure optimal performance.
  • An SD card – between 4-8GB was plenty as I didn’t use it for file storage.
  • XBMC Image which can be found here.
  • Old monitor / screen & power supply – I used an old Dell monitor that I found at the charity shop.
  • Photo frame – I picked one up from the charity shop for €2.
  • Sandpaper – for the photo frame.
  • Spray paint – as I wanted to tidy up the frame.

Steps I followed:

Source and assemble the parts

1. The first step with creating the photo frame was sourcing the monitor and the frame. A quick trip to the charity shop and I found the perfect sized monitor and a good sized frame to fit around it.

2. When I got home, I started to gather together everything I needed. I had a Raspberry PI and associated gear lying around so I didn’t need to order one and wait for it to arrive. This suited me as I was very impatient to get started with this project.

3. The next step was to take apart the monitor. I did this very carefully using some tools that I bought originally to take apart my old tablet.

4. With the monitor bare, I placed the photo frame over it to see what I was working with. It was almost a good fit but not quite. I needed to use a dremmel to sand away some of the inside of the frame just enough so the frame would slot around the monitor.

5. With the frame now the right size, I started to tidy up some scratches by giving the frame a very light sanding. I ended up liking this worn look so decided against spray painting the frame, at least for now.

Prepare the PI

1. On my laptop, I followed the following tutorial to add the NOOBS installer to the SD card: Tutorial from raspberrypi.org .

2. I hooked up the PI to a monitor, attached a keyboard and mouse, slotted in the pre-loaded SD card and booted it up.

3. As I already had a home media server set up and running in the house, I decided to use this as the source of media for the photo frame.

4. To install the screen saver add-on which would display my images I followed the following steps:

4.1 From the Kodi home screen select Addons > Download > Look and Feel > Screensaver

4.2 Then select the Multi Slideshow Screensaver and select Install.

5. I then tested the screen saver add-on to ensure it worked and once I was happy with this, it was time to start assembling the parts!

Assemble the parts

Now for the fun.
I placed the frame around the monitor, it was a snug fit.
Next, I attached the pi case to the back of the monitor screen.
Finally, I added the power cables, turned it all on and watched everything come to life!

Further Improvements

With the photo frame up and running the next step is definitely to find a permanent home for it so that it doesn’t lean against the wall. I am planning to attach a stand that will be durable enough to support the weight.

It’s possible I may also decide on giving the frame a coat of spray paint should the mood strike me!

I also need to spend some time curating the images that display in the photo frame. Initially I just used a gallery of all of my more recent photos but this includes random photos of documentation, diagrams and the like that definitely don’t have a place in the photo frame.

Conclusion

I really hope you enjoyed reading this guide! If you did, please consider sharing it on social media to help other people to find it.

If you found this article on creating a digital photo frame with a Raspberry Pi interesting, you might like to read these articles next:

If you enjoyed this article why not share it?